Evaluating the screen performance in sand control design by laboratory sand retention test
Abstract
To produce oil and gas from unconsolidated sandstone reservoirs, sand screens are necessary to control sand flowing from the formation into the wells, causing well pluggings. In open hole completion, stand-alone sand screen is an essential component to prevent sand production, thus, selection of suitable sand screens is critical to minimize sand production and optimize the well’s production life.
Nowadays, premium screens with steel meshes make the openings of the screen slots complex in shape, resulting in a very different effect of sand retention compared to the traditional screens. The sand retention test is considered a standard and must be conducted to select screen opening and size, which decides the sand prevention capacity of the screen.
The paper presents the factors affecting the results of laboratory sand retention tests and proposes solution in the direction of considering the data trend rather than relying completely on the output results. The paper also brings about the evaluation method through the change the screen’s permeability to have better qualitative results compared to the traditional methods.
References
C.J. Coberly, “Selection of screen openings for unconsolidated sands”, Drilling and Production Practices, 1937.
Rajesh A. Chanpura, Somnath Mondal, Jamie S. Andrews, Anne-Mette Mathisen, Joseph A. Ayoub, Mehmet Parlar, and Mukul M. Sharma, “New analytical and statistical approach for estimating and analyzing sand production through plain square-mesh screens during a sand- retention test”, SPE Drilling & Completion, Vol. 28, No. 02, pp. 135 - 147, 2013. DOI: 10.2118/151637-PA.
Ehimhen Agunloye and Erome Utunedi, “Optimizing sand control design using sand screen retention testing”, SPE Nigeria Annual International Conference and Exhibition Lagos, Nigeria, 5 - 7 August 2014. DOI: 10.2118/172488-MS.
T.J. Ballard and S.P. Beare, “Sand retention testing: the more you do, the worse it gets", SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA, 15 - 17 February 2006. DOI: 10.2118/98308-MS.
B. Wu, G. Lupton, T. Barton, R. Denke, C.Y. Wong, Y. Feng, J. Boulanger, and S.K. Choi, "Development of a novel sand retention cell”, SPE Asia Pacific Oil & Gas Conference and Exhibition Perth, Australia, 25 - 27 October 2016. DOI: 10.2118/182494-MS.
Somnath Mondal, Mukul M. Sharma, Rajesh A. Chanpura, Mehmet Parlar, and Joseph A. Ayoub, “Numerical simulations of sand-screen performance in standalone applications”, SPE Drilling & Completion, Vol. 26, No. 4, pp. 472 - 483, 2011. DOI: 10.2118/134326-PA.
George Gillespie, Calvin K.Deem, and Christophe Malbrel, “Screen selection for sand control based on laboratory tests”, SPE Asia Pacific Oil and Gas Conference and Exhibition Brisbane, Australia, 16 - 18 October 2000. DOI: 10.2118/64398-MS.
Tracey Ballard, Nils Kageson-Loe, and Anne Mette Mathisen, “The development and application of a method for the evaluation of sand screens”, SPE European Formation Damage Conference, The Hague, The Netherlands, 31 May - 1 June 1999. DOI: 10.2118/54745-MS.
Bashir Busahmin and Brij B. Maini, “Measurements of surface tension for mineral and crude oil systems”, Defect Diffusion Forum, Vol. 391, pp. 106 - 113, 2019. DOI:10.4028/www.scientific.net/DDF.391.106.
Tracey Ballard and Steve Beare, “An investigation of sand retention testing with a view to developing better guidelines for screen selection”, SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA, 15 - 17 February 2012. DOI: 10.2118/151768-MS.
Richard M. Hodge, Robert C. Burton, Vernon Constien and Valerie Skidmore, “An Evaluation Method for Screen-Only and Gravel-Pack Completions”, International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA, 20 - 21 February 2002. DOI: 10.2118/73772-MS.
1. The Author assigns all copyright in and to the article (the Work) to the Petrovietnam Journal, including the right to publish, republish, transmit, sell and distribute the Work in whole or in part in electronic and print editions of the Journal, in all media of expression now known or later developed.
2. By this assignment of copyright to the Petrovietnam Journal, reproduction, posting, transmission, distribution or other use of the Work in whole or in part in any medium by the Author requires a full citation to the Journal, suitable in form and content as follows: title of article, authors’ names, journal title, volume, issue, year, copyright owner as specified in the Journal, DOI number. Links to the final article published on the website of the Journal are encouraged.
